²  Element:  Metal Oxide
²  Sealing: PVDF tube
²  Lug: Ni-plated brass
²  Wire: UL1332 Teflon wire
²  Connector: Optional
 
l  Dissipation Constant: Ta: 25℃ = 5 mW/℃
l  Response Time: 20 sec
l  Resistance at 25℃ : 10kΩ ~ 100kΩ
l  Resistance tolerance : ±1%,±2%,±3%,±5%
l  Operating temperature: -30 ~250℃
l  Application: Oven, Warmer
 
 
 
-  The Diode thermistor is clip bonding with Teflon lead wire, and is potted in PVDF tube for insulation and mechanical protection. It’s then assembled with commercial Ni-plated lug, in order to enables easy settlement. The unit is usually locked onto the surface of heating board in oven or warmer, to detect surface temperature change. Glass encapsulated Diode is stable in high temperature, which ensure great performance and reliability. Terminal and connector are selective.
Back to the top